Shipping to 
and 
Blog
How to export your survey work from your Android device to QGIS and AutoCAD
In this tutorial we will explain how to export your Android device surveying project created with SW Maps, Mapit GIS or Mapit Spatial to QGIS
How to use custom geoid for orthometric height measurements in Android with Mapit GIS or Mapit Spatial
For some applications you may need to use a high quality orthometric height (height above mean sea level) measurement in real time. In orthometric height, planet earth
New ZED-F9P 5Hz and 10Hz rover and moving base configuration files
If you are struggling to set up ZED-F9P at 10Hz or 5Hz with moving base and heading information, check our updated ZED-F9P configuration files page
simpleSSR coverage extended to Florida
As of last week many new customers will be able to enjoy centimeter level plug&play RTK positioning without the need of a base station or
Ellipsoidal, orthometric and geoid height 101
Many customers get confused with the different heights (altitude) reported by their GNSS receiver.In this post we will show the concept of each one with
Tell ArduSimple your 2021 new products wish list!
We are preparing a lot of surprises for 2021, but we need your help to make sure that we are working on the right direction.
simpleSSR coverage extended to Estonia, Latvia, Lithuania, UK, eastern Ireland and all US
As of last week many new customers will be able to enjoy centimeter level plug&play RTK positioning without the need of a base station or
How to build a portable PPK data logger with simpleRTK2B Pro receiver
Post-Processed Kinematic (PPK) is an alternative to Real-Time Kinematic (RTK) for accurate positioning. Unlike RTK, PPK uses post-processing algorithms after data collection. Both the base
Centimeter GPS arrives to industrial pcs, tablets, laptops and embedded computers
Bring low cost high precision RTK GNSS to your Mini PCI Express platforms with this board fully compatible with MiniPCIe half-size and full-size sockets. Available in
4G NTRIP Client new firmware V1.53 available
The firmware V1.53 for your 4G NTRIP Client brings major improvements in reconnection time which will help you keep RTK in more difficult conditions. You
New PCB footprints and STEP models
Thanks to www.snapeda.com, if you are working on a PCB design with ArduSimple centimeter level GPS receivers, you can now find STEP models, and also
Aftermarket Autopilot for Professional Mowers
Today we want to share with you an interesting project, especially useful for commercial landscapers and any of us who have a lawn: an Aftermarket
