Blog

December 3: Production update
Hello backers & followers, It’s one week since our last update and we wanted to share with you what’s keeping us busy. First, we are

We are almost there!
Last week the simpleRTK2B Kickstarter campaign exceeded its funding goal. We are very happy to launch this project and we want to thank again everyone

Ardusimple’s OEM antenna vs u-blox ANN-MB & Tallysman TW3865
Today it’s a good day to talk about antennas. There has been a lot of questions about our dual band antenna, and we thought it was

Antenna survey results and additional information about the antennas
We want to thank all the backers and community members to participate in the survey about the IP65 antenna length. 60 backers have participated in

simpleRTK2B project is go: u-blox ZED-F9P modules ordered
The Kickstarter project we launched in September to fund an initial large batch production of the simpleRTK2B boards is close to its end. We are

simpleRTK2B performance with NTRIP correction services
Prepare yourself a strong coffee because the data shown here will have to be read twice. In the last post we showed how to connect

How to connect simpleRTK2B series receiver to a NTRIP correction service via PC
We have shown some figures about the performance of the u-blox ZED-F9P in base-rover configuration, where the base sends corrections to improve the accuracy of

Building a high precision navigation gadget with simpleRTK2B
In previous updates we have given some figures about the accuracy of the simpleRTK2B board with u-blox ZED-F9P module. We like to spend hours looking

Product update simpleRTK2B: pre-production prototype is real
We are very excited today, and we wanted to share it with you. We finished yesterday the assembly of the first pre-production sample of simpleRTK2B,

Testing simpleRTK2B accuracy in RTK base-rover configuration
We have received many questions about the real accuracy of the simpleRTK2B board with the ZED-F9P module and we will write a series of posts

How to connect simpleRTK2B RTK receiver to STM32 Nucleo
In this tutorial you will see how to connect the simpleRTK2B series receiver with a STM32 Nucleo L152RE board for a debug session. If your

simpleRTK2B connection to smartphone via Bluetooth
The simpleRTK2B shield is compatible with all the GNSS applications available for Android/iOS that support USB or Bluetooth connections with an external GNSS unit. You