News

Dear followers, After a long wait, finally we have in our warehouse the freshly baked simpleRTK2B boards assembled with u-blox ZED-F9H module = simpleRTK2B-F9H. ZED-F9H is a special module: It cannot be used standalone, needs always to be connected to a ZED-F9P configured as moving base. ZED-F9H only outputs heading, and in UBX format. (For […]

Dear followers, We are very excited today to make this new product announcement. Not only because we think it’s an excellent accessory for simpleRTK2B, but also because it’s a joint collaboration with one of our customers. Let us tell you more. A few months back we spotted in our forum a customer that was developing

Dear followers, Low cost high precision RTK GPS/GNSS positioning arrives to your Mini PCI Express platforms, thanks to our new adapter board fully compatible with the simpleRTK2Blite and u-blox ZED-F9P. The new ArduSimple’s mPCIe Starter Kit IP67: Connects ZED-F9P UART1 to your embedded computer or single board computer SBC using mPCIe connector and a FTDI converter. Powers

Dear followers, With the launch of the new lightweight helical antenna, we now have an interesting antenna portfolio that tries to meet the requirements of all your low cost high precision RTK GPS/GNSS projects: u-blox ANN-MB: lowest cost antenna in the market able to achieve sub 2-cm accuracy. ArduSimple OEM: similar performance/price ratio as ANN-MB

Dear followers, During the last months we received many messages saying that current Multiband antennas are too heavy for some applications. And we could not sleep at night because of this. After evaluating several alternatives we finally selected the winner, and starting today is available for purchase in our webshop the ArduSimple Lightweight Multiband GNSS

Dear followers, It’s now almost a year since we started this adventure together, and we hope it has been as exciting for you as it has been for us. We will have a very exciting end of 2019 with a lot of new product launches, stay tuned. simpleRTK2B production is now stable, and has become

Dear followers, We have seen that ordering the right cable to connect to your Pixhawk had become a real challenge. And this was not letting us sleep in peace. After thinking hard how to make this process simpler, we decided to make a “Pixhawk cable set” with all possible cable combinations, so you can now

Dear followers, Today we wanted to let you know about the plastic enclosure developed by our customer Jerome. It’s compatible with simpleRTK2B, and with the MR and LR kits. 3D step file for print-at-home is available here: https://www.thingiverse.com/thing:3551604 He is also selling it through eBay for amazing 30$/unit: https://www.ebay.com/itm/ARDU-RTK-Case-compatible-with-ArduSimple-SIMPLERTK2B-v1-0-CASE-ONLY-/153447153294 For any questions, you can contact

Dear followers, Today we open a new section in our site: Customer Projects! We have seen amazing work around ArduSimple’s products, and we are sure the rest of the community will benefit from hearing about it. How it will work: We will start now posting in our blog about customer projects arriving to our ears.

Dear followers, As promised, simpleRTK2Blite is here and in stock! Remaining backorders will be shipped out on Monday July 29th! And we wanted to introduce to you the final version of simpleRTK2Blite. Some features that are relevant to highlight: Can be used standalone by connecting it to an XBee socket or a Pixhawk autopilot by