Shipping to 
and 
New product: ix Industrial to RJ45 Ethernet cable
Basically a good quality black Ethernet cable from ix Industrial Type A to RJ45.
New product: ix Industrial to RJ45 Ethernet cable Read More »
News
New product: Magnetic Stand for SMA Antenna
With the ArduSimple Magnetic Stand for SMA Antennas you will be able to place your Helical and LR antennas in a better location, not directly connected to the electronics board. This will help you incresae the signal reception and the reliability of your wireless connection. Thanks to its low loss RG58 2 meters cable, the
New product: Magnetic Stand for SMA Antenna Read More »
Do you need absolute accuracy or relative accuracy is enough?
Latest generation RTK receivers can provide you with very accurate position at affordable cost. But investing on your own RTK receiver it’s still a big decision. In some countries, RTK corrections are available for free and this helps. But if you are unlucky and there is no free national RTK network, or simply there’s no
Do you need absolute accuracy or relative accuracy is enough? Read More »
Introduction to coordinate reference systems a.k.a “I have an offset on all my RTK positions!”
It might have happened to you: your RTK receiver is in RTK FIXED, reporting centimeter precision and you are happily doing very accurate measurements. You go back to your desk and compare your results with the measurements from another day or from another person. And you get a big surprise: there is an offset! It’s
New product: simpleGNSS Timing with u-blox F10
Welcome our new simpleGNSS Timing: compact dual-band L1+L5 GNSS receivers with sub-meter accuracy and nanosecond-level timing output, without the need of correction data. Powered by the latest u-blox F10 chipset, it supports L1 and L5 signals from GPS, GLONASS, Galileo, BeiDou, NavIC, QZSS & SBAS (WAAS, EGNOS, MSAS, GAGAN and SouthPan). simpleGNSS is the first commercial
New product: simpleGNSS Timing with u-blox F10 Read More »
New product: use USB OTG function on your phone and charge it at the same time
Tired that your USB OTG device is draining the battery of your phone? Use this cable to power your phone while using the USB OTG feature. Compatible with all ArduSimple boards but also with any other USB accessories for your phone.
New product: use USB OTG function on your phone and charge it at the same time Read More »
simpleRTK2B Pro facelift for easier plastic enclosure integration
We have done a small upgrade on our simpleRTK2B Pro boards for easier integration: You will find all details in the simpleRTK2B Pro product page.
simpleRTK2B Pro facelift for easier plastic enclosure integration Read More »
Product update: simpleRTK3B with onboard SD card and native Ethernet support!
Today we are announcing and important update for our simpleRTK3B boards. Starting now all our simpleRTK3B Pro and Heading boards include these new features: Check out our simpleRTK3B product page for all details!
Product update: simpleRTK3B with onboard SD card and native Ethernet support! Read More »
New product: Budget Survey Tripleband GNSS Antenna (IP66)
Today we are announcing an affordable but yet high performance antenna for our Triple Band simpleRTK3B Pro boards powered by Septentrio Mosaic-X5 receiver. And as always, available from stock for global delivery in 2-4 working days. Have a look at all the details of our new Budget Survey Tripleband GNSS Antenna (IP66).
New product: Budget Survey Tripleband GNSS Antenna (IP66) Read More »
New product: simpleRTK2B Fusion with u-blox ZED-F9R
We upgraded our u-blox ZED-F9R board with so many features that we decided to change its name. The amazing thing of ZED-F9R is not only that is able to do GNSS RTK, but that is able to keep centimeter precision where ZED-F9P cannot: driving under trees, next to high building, or even in tunnels! Welcome
New product: simpleRTK2B Fusion with u-blox ZED-F9R Read More »
