News

If you are in the marine industry you might have heard of NMEA protocol over CAN bus, also called NMEA2000. We have added compatibility to this protocol into our SBC platform. Together with the integrated centimeter-level position and sub-degree heading at 10Hz, it can really help you accelerate your project and reduce your development costs. […]

ArduSimple 3D Choke Ring GNSS Tripleband + L-band antenna (IP67) brings high performance and low cost together. Approved by NGS and with ANTEX calibration files available. In stock and ready for global shipment in 2-4 working days. What is a 3D Choke Ring Antenna? Choke ring antennas are known for their muti-path rejection compared with

Starting today we accept some crypto currencies as payment method. Just add your wished items to your cart, select “Pay with cryptocurrency” and complete your order. You will receive payment instructions via e-mail!

It is not a typo, we are offering free PPP-RTK corrections until end of 2022, to all our customers of 4G NTRIP Master, Ethernet NTRIP Master & simpleRTK2B SBC products. Thanks to the new u-blox PointPerfect service, if you are in Europe or Continental North America you can enjoy 2-4 centimeter accuracy (CEP) no matter

It can’t get smaller 🙂 ZED-F9P in M.2 form factor. Bring low cost high precision RTK GNSS to your embedded system with M.2 sockets with this board fully compatible with M.2 2230 Key A+E. And starting today, simpleRTK2B-M.2 in stock for global shipment in 2-4 working days.

Accelerate your RTK project with our configuration files for ZED-F9P HPG 1.30 firmware.

If you are looking for improved positioning performance, it will be difficult for you to notice the difference with the new firmware. ZED-F9P HPG 1.30 firmware brings mostly software feature like: Support for free CLAS L-band RTK-SSR correction services in Japan (with this accessory) Support for paid u-blox L-band RTK-SSR correction services in Europe and

Every day we have more products and it is getting also more difficult to keep it simple 🙂 For this reason and together with the launch of the new supercharged simpleRTK2B Pro (replacing the previous “V3”), we decided to change the name to the original simpleRTK2B (a.k.a. “V1”). Starting today we will call it simpleRTK2B

Today we say goodbye to our ZED-F9P simpleRTK2B V3 board to welcome the new simpleRTK2B Pro. We introduced a few improvements to our high end ZED-F9P board: USB-C connectors Timepulse and EXTINT are now also available on the JST connector “NO RTK” LED in red color “GPS FIX” LED in green color Soldered Arduino Headers

If you are looking to start your project with ArduSimple L1/L2 or L1/L2/L5 GPS/GNSS RTK multiband antennas, as of today the 3D files in STEP format are available so you can design your project with your favorite 3D tool. You can download them both from each antenna product page under the tab “Documentation” or in